John Deere 270D LC Excavator Specs
 
Engine
Type John Deere 6068H
Non Road Emission Standard meets EPA and CARB emission
Net Power (ISO 9249) 188 hp (140 kW) @ 2,100 rpm
Net Torque (ISO 9249) 599 lb ft (813 Nm) @ 1,400 rpm
Displacement 414 cu. in. (6.8 L)
Aspiration altitude compensating turbocharger and air-to-air charge air cooler

 

Electrical    
Batteries 2 x 12 volt
Reserve Capacity 180 min.
Alternator Rating 80 amp

 

Undercarriage    
Drawbar Pull 56,074 lb (25 435 kg)

 

Ground Pressure    
32 in. (800 mm) Triple Semi-Grouser Shoes 5.84 psi (40.3 kPa)

 

Serviceability    
Fuel Tank 132 gal. (500 L)
Cooling System 31.6 qt. (29.9 L)
Engine Oil with Filter 26 qt. (24.6 L)
Hydraulic Tank 39 gal. (148 L)
Hydraulic System 63.4 gal. (240 L)
Propel Gearbox (each) 9 qt. (8.5 L)
Swing Drive 8 qt. (7.6 L)

 

Operating Weights    
Full Fuel Tank, 175 lb Operator; 1.75 cu yd, 42 in. 2,279 lb Bucket; 12 ft. 4 in. Arm; 13,447 lb Counterweight;  
32 in. (800 mm) Triple Semi-Grouser Shoes 63,425 lb (28 770 kg)
 
Operating Dimensions  
Arm Length 12 ft. 4 in. (3.75 m)
Arm Force 25,979 lb (115.55 kN)
Bucket Digging Force 37,480 lb (166.7 kN)
Lifting Capacity Over Front at Ground Level
20 ft. (6.1 m) Reach		 19,727 lb (8948 kg)
A) Maximum Reach 37 ft. 1 in. (11.30 m)
A')Maximum Reach at Ground Level 36 ft. 6 in. (11.12 m)
B) Maximum Digging Depth 25 ft. 11 in. (7.91 m)
B')Maximum Digging Depth at 8 ft.  Flat Bottom 25 ft. 8 in. (7.72 m)
C) Maximum Cutting Height 34 ft. 4 in. (10.46 m)
D) Maximum Dumping Height 24 ft. 7 in. (7.49 m)
E) Minimum Swing Radius 12 ft. 9 in. (3.89 m)
F) Maximum Vertical Wall 23 ft. 1 in. (7.03 m)
G) Tail Swing Radius 9 ft. 8 in. (2.94 m)

 

 

Machine Dimensions 12 ft. 4 in. (3.75 m)
A) Overall Height 11 ft. 0 in. (3.35 m)
B) Overall Length 35 ft. 3 in. (10.74 m)

 

Lift Capacities

Boldface italic type indicates hydraulic-limited capacities; lightface type indicates stability-limited capacities, in lb. (kg).  Ratings at bucket lift hook; machine equipped with 2.3 cu. yd., 54 in. 2,557 lb bucket; 16,314 lb (7400 kg) counterweight; standard gauge; and situated on firm, uniform supporting surface.  Total load includes weight of cables, hook, etc.  Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine.  All lift capacities are based on SAE J1097.
Load Point Height 10 ft. (3.05 m) 15 ft. (4.57 m) 20 ft. (6.10 m) 25 ft. (7.62 m) 30 ft. (9.15 m)
Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side

With 12 ft. 4 in. (3.75 m) arm and 32 in. (800 mm) triple semi-grouser shoes
20 ft. (6.10 m)             8,490
(3851)		 8,490
(3851)		    
15 ft. (4.57 m)             8,629
(3914)		 8,629
(3914)		 5,984
(2714)		 5,984
(2714)
10 ft. (3.05 m)     17,039
(7729)		 17,039
(7729)		 13,189
(5982)		 13,189
(5982)		 9,676
(4389)		 9,676
(4389)		 9,609
(4359)		 7,937
(3600)
5 ft. (1.52 m)     24,377
(11 057)		 22,290
(10 111)		 14,398
(6531)		 14,398
(6531)		 11,405
(5173)		 10,668
(4839)		 10,524
(4774)		 7,680
(3484)
Ground Level     28,866
(13 094)		 20,936
(9497)		 19,727
(8948)		 13,562
(6152)		 13,401
(6079)		 10,091
(4577)		 11,626
(5274)		 7,371
(3343)
-5 ft. (-1.52 m) 15,885
(7205)		 15,885
(7205)		 30,355
(13 769)		 20,481
(9290)		 21,412
(9712)		 13,102
(5943)		 15,195
(6892)		 9,601
(4355)		 12,245
(5554)		 7,096
(3219)
-10 ft. (-3.05 m) 22,504
(10 208)		 22,504
(10 208)		 29,877
(13 552)		 20,489
(9294)		 21,738
(9860)		 12,972
(5884)		 16,083
(7295)		 9,284
(4211)		 12,055
(5468)		 6,922
(3140)
-15 ft (-4.57 m) 30,876
(14 005)		 30,876
(14 005)		 27,577
(12 509)		 20,821
(9444)		 20,489
(9294)		 13,131
(5956)		 15,965
(7242)		 9,178
(4163)		 10,392
(4714)		 6,920
(3139)
-20 ft (-6.10 m) 30,941
(14 035)		 30,941
(14 035)		 22,517
(10 214)		 21,537
(9769)		 16,452
(7463)		 13,673
(6202)		 15,518
(7039)		 9,328
(4231)		    
 
Click Here to download full brochure
 

 

Contact Us    Site Map