Home Rates Policies Guidelines Exclusions Equipment Availability Job Planning Production Estimating Equipment Specs Model Comparisons Conversions Material Weights Download Center Credit Application Damage Waiver Rate Book Equipment Fleet Model Comparisons Erb Home

Engine
Type	John Deere PowerTech 5030Tw meets EPA and CARB emission non-road regulations
Displacement	186 cu. in. (3 L)
Cylinders	5
Gross Horsepower	82 gross hp (56.9 kW)
Net Horsepower	76 net hp (52.2 kW)
Torque Rise	31%
Rated Engine Speed	2,800 rpm
Aspiration	Turbocharged
Air Cleaner	Dry dual element
Fuel Capacity	24 gal. (91 L)

 

Electrical System
Alternator Output	12 volt, 70 amp
Battery	12 volt, 925 cca

 

Transmission/Steering
Type	Hydrostatic-Servo
System High-Pressure Relief	5,250 psi
Travel Speeds      Single Speed      Two Speed, Low      Two Speed, High	0 to 7 mph (0 to 11.3 km/h) 0 to 7 mph (0 to 11.3 km/h) 0 to 12 mph (0 to 19.3 km/h)

 

Loader Performance
Tipping Load	5,500 lb. (2495 kg)
SAE Rated Operating Capacity1	2,750 lb. (1247 kg)
ROC with Optional Counterweights	3,100 lb. (1406 kg)
Boom Breakout	4,800 lb. (2177 kg)
Bucket Breakout     Foundry Bucket     Construction Bucket	10,500 lb. (4763 kg) 7,430 lb. (3370 kg)
1 Operating capacity rated with standard tires and foundry bucket according to SAE standard J818 operating capacity to equal no more than one half the tip load.

Dimensions
A) Length without Bucket	115.5 in. (2934 mm)
B) Length with Bucket	138.5 in. (3518 mm)
C) Width without Bucket	76.1 in. (1933 mm)
D) Height to Top of ROPS	82.9 in. (2106 mm)
E) Height to Hinge Pin	127 in. (3226 mm)
F) Dump Height	102 in. (2591 mm)
G) Dump Reach         Foundry Bucket         Construction Bucket	32 in. (813 mm) 39 in. (991 mm)
H) Wheelbase	47.6 in. (1209 mm)
I) Ground Clearance	11 in. (279 mm)
J) Angle of Departure	27 degrees
K) Front Turn Radius	83.7 in. (2126 mm)
L) Dump Angle (At Full Lift Height)	45 degrees
M) Bucket Rollback (At Ground Level)	35 degrees

 

Operating Weight
Operating Weight	8,580 lb (2858 kg)