Home Rates Policies Guidelines Exclusions Equipment Availability Job Planning Production Estimating Equipment Specs Model Comparisons Conversions Material Weights Download Center Credit Application Damage Waiver Rate Book Equipment Fleet Model Comparisons Erb Home

Engine
Type	John Deere PowerTech 5030Hw meets EPA and CARB emission non-road regulations
Displacement	186 cu. in. (3 L)
Cylinders	5
Gross Horsepower	91 gross hp (67.7 kW)
Net Horsepower	85 net hp (63.4 kW)
Torque Rise	47%
Rated Engine Speed	2,800 rpm
Aspiration	Turbocharged
Air Cleaner	Dry dual element
Fuel Capacity	24 gal. (91 L)

 

Electrical System
Alternator Output	12 volt, 70 amp
Battery	12 volt, 925 cca

 

Transmission/Steering
Type	Hydrostatic-Servo
System High-Pressure Relief	5,100 psi
Travel Speeds      Single Speed      Two Speed, Low      Two Speed, High	0 to 7 mph (0 to 11.3 km/h) 0 to 6.6 mph (0 to 10.6 km/h) 0 to 11.2 mph (0 to 18 km/h)

 

Loader Performance
Tipping Load	6,350 lb. (2880 kg)
SAE Rated Operating Capacity1	3,175 lb. (1440 kg)
ROC with Optional Counterweights	3,525 lb. (1599 kg)
Boom Breakout	6,650 lb. (3016 kg)
Bucket Breakout     Foundry Bucket     Construction Bucket	11,600 lb. (5262 kg) 8,210 lb. (3724 kg)
1 Operating capacity rated with standard tires and foundry bucket according to SAE standard J818 operating capacity to equal no more than one half the tip load.

Dimensions
A) Length without Bucket	115.5 in. (2934 mm)
B) Length with Bucket	138.5 in. (3518 mm)
C) Width without Bucket	77.1 in. (1958 mm)
D) Height to Top of ROPS	82.9 in. (2106 mm)
E) Height to Hinge Pin	127 in. (3226 mm)
F) Dump Height	102 in. (2591 mm)
G) Dump Reach         Foundry Bucket         Construction Bucket	32 in. (813 mm) 39 in. (991 mm)
H) Wheelbase	48.6 in. (1234 mm)
I) Ground Clearance	9.5 in. (241 mm)
J) Angle of Departure	27 degrees
K) Front Turn Radius	83.7 in. (2126 mm)
L) Dump Angle (At Full Lift Height)	45 degrees
M) Bucket Rollback (At Ground Level)	35 degrees

 

Operating Weight
Operating Weight	9,160 lb (2858 kg)