Home Rates Policies Guidelines Exclusions Job Planning Production Estimating Equipment Specs Model Comparisons Conversions Material Weights Download Center Credit Application Damage Waiver Rate Book Equipment Fleet Model Comparisons Erb Home

Engine
Manufacture and Model	John Deere 4045T water-cooled and turbocharged diesel certified to EPA Tier 2 emissions
Rated Power	99 SAE net hp (74 kW) @ 2,200 rpm per ISO 9249
Cylinders (wet sleeve)	4
Displacement	276 cu. in. (4.5 L)
Fuel Consumption, Typical	1.9 to 3.0 gal/hr (7.2 to 11.9 L/h)
Maximum Net Torque	307 lb ft (394 Nm) @ 1,400 rpm
Lubrication	pressure system with full-flow spin-on filter and integrated oil-to-water cooler
Air Cleaner	dual stage dry type with safety element and precleaner, with dash mounted restriction indicator
Electrical System	24 volt with 45-amp alternator
Cooling Fan	suction type, hydrostatic drive
Cold-Starting Aid	intake air heater

 

Transmission
Forward and Reverse Speed Ranges       Low Speed Range       High Speed Range	0 to 3.3 mph (0 to 5.3 km/h) 0 to 5.5 mph (0 to 8.9 km/h)

 

Hydraulic System
Loader Cycle Times      Lifting      Lowering      Bucket Dump	6.4 sec 3.1 sec 1.9 sec

 

Capacities
Fuel Tank with Lockable Cap	48 gal. (180 L)
Cooling System with Recovery Tank	6.3 gal. (24 L)
Engine Oil Including Spin-On Filter	3.9 gal. (14.7 L)
Hydraulic/Hydrostatic Reservoir with Filter	33.3 gal. (126 L)
Splitter Drive	1.85 qt. (1.75 L)
Final Drive (each)	9.25 qt. (8.75 L)

 

Undercarriage
Tracks	John Deere Duar-Trax features large deep-heat-treated components; pins and bushings are sealed for life; rollers and idlers are permanently sealed and lubricated; full-length track frame covers reduce material buildup and ease cleaning
Chain	sealed and lubricated
Track Shoes (each side)	38
Ground Contact Area    18 in (457 mm) Grouser Width (closed center, double bar)     20 in (508 mm) Grouser Width (closed center, double bar)	3,130 sq. in. (20 199 cm2) 3,480 sq. in. (22 454 cm2)
Ground Clearance, Minimum with Double Bar Grouser (excluding grouser height)	16 in. (408 mm)
Length of Track on Ground	87 in. (2210 mm)
Track Gauge (standard)	63 in. (1600 mm)
Track Rollers (each side)	6
Carrier Rollers	1
Track Pitch	6.73 in. (171 mm)

 

Ground Pressure
With Standard Equipment, Canopy, Bucket, Full Fuel Tank, and 175 lb (79 kg) Operator
18 in (457 mm) Double Grouser Shoes	7.5 psi (52 kPa)
20 in (508 mm) Double Grouser Shoes	6.8 psi (47 kPa)

 

SAE Operating Weight
With Standard Equipment, Canopy, Bucket, Full Fuel Tank, and 175 lb (79 kg) Operator, and 18 in (457 mm) Double Grouser Shoes	23,600 lb (10 700 kg)

Overall Dimensions
A) Height over Canopy (including grousers)	118 in. (2998 mm)
B) Height over Exhaust Pipe	90 in (2276 mm)
C) Length to Front of Track	152 in. (3859 mm)
D) Overall Length (with standard bucket with bolt-on teeth)	212 in. (5383 mm)
E) Track Guage	63 in. (1600 mm)
F) Ground Clearance	16 in. (408 mm)
Standard Bucket with Bolt-on Teeth and Segmented Cutting Edges
Capacity Heaped	1.7 cu. yd. (1.3 m3)
Breakout Force	22,480 lb (10 200 kg)
Static Tipping Load	14,750 lb. (6690 kg)
G) Dumping Height at 45 degrees	105 in. (2679 mm)
H) Reach at 45 degrees	35 in. (890 mm)
I) Maximum Digging Depth Below Grade	5.1 in. (130 mm)
J) Maximum Operating Height	176 in. (4474 mm)
K) Maximum Height of Hinge Pin	133 in. (3368 mm)
L) Height of Hinge Pin, Transport Position	18.1 in. (459 mm)
M) Width of Bucket	91 in. (2300 mm)