Features & Specs
  • John Deere PowerTech PWX 4.5L Interim Tier 4 engine
  • Exclusive Quad-Cool with hydraulically driven fan cools-on-demand
  • Exclusive sealed-switch module with finger-tip control
  • Dual path hydrostatics with power management
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 110
Blade Capacity 1.7 cu. yd.
Weight 26,940 lbs
Fuel Tank Capacity 47 gal.
Fuel Consumption gal/hr
Width 7 ft 6 in
Height 9 ft 10 in
Length 20 ft. 2 in.

View Current Brochure View Non Current Specs View Used Equipment

Competitive Models
Cat 939C
Liebherr LR614

John Deere 605K Crawler Loader

Manufacture and Model John Deere PowerTech PWX 4045
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
SAE Net Rated Power 110 hp (83 kW) @ 2,200 rpm
Net Peak Torque 350 lb. ft. (474 Nm) @ 1,400 rpm
Displacement 276 cu. in. (4.5 L)
Air Cleaner Vacuum-aspirated dual-element dry canister
Electrical System 24 volt with 100 amp alternator
Cooling Fan Variable-speed suction fan with automatic reversing

Travel Speeds 5.5 mph (8.9 km/h)

Fuel Tank 47 gal. (178 L)
Cooling System with Recovery Tank 6 gal. (23 L)
Engine Oil with Filter 5 gal. (19 L)
Transmission Reservoir with Filter 13 gal (49 L)
Hydraulic Reservoir and Filter 22 gal. (83 L)
Final Drive 2.2 gal. (8.3 L)

Undercarriage 20 in. Grouser Width 18 in. Grouser Width
Tracks Track frame with front and rear track guides and sprocket guards; John Deere undercarriage features deep-heat treated, sealed, and lubricated track links and though-hardened, sealed, and lubricated rollers from maximum wear resistance
Track Gauge 62 in. (1600 mm)
Chain Sealed and Lubricated
Shoes (each side) 38
Track Rollers (single flange, each side) 6
Track Length on Ground 85 in. (2164 mm)
Ground Contact Area 3,408 sq. in. (21 986 cm2) 3,086 sq. in. (19 909 cm2)
Ground Pressure 7.9 psi (54.5 kPa) 8.7 psi (60.1 kPa)
Track Pitch 6.75 in. (171.45 mm)

Operating Weights  
Base Weight (with standard equipment, rollover protective structure, full fuel tank, and 175lb operator) 26,940 lb (12 220 kg)

Overall Dimensions  
A) Overall Height to Roof 9 ft. 10 in. (2958 mm)
B) Tread Depth with Double-Bar Grouser 1.5 in. (37 mm)
C) Length to Front of Track 14 ft. 3 in. (4355 mm)
D) Overall Length with Bucket and Teeth
--General Purpose

20 ft. 1.7 in. (6140 mm)
20 ft. 1 in. (6120 mm)
E) Track Gauge 5 ft. 3 in. (1600 mm)
F) Ground Clearance 12.6 in. (320 mm)

Erb Equipment Phone Numbers