John Deere 700J Dozer Specs
 
Engine 700J LT 700J XLT 700J LGP
Manufacture and Model John Deere 6068T with turbocharger
Non-Road Emission Standards certified to EPA Tier 2 emissions
Net Peak Power (ISO9249) 115 SAE net hp (86 kW) / 123 SAE gross hp (92 kW)
Net Peak Torque (ISO9249) 395 lb. ft. (536 Nm)
Cylinders 6
Displacement 414 cu. in. (6.8 L)
Air Cleaner dual stage dry type with safety element, precleaner, and dash-mounted restriction indicator
Lubrication pressure system with full-flow spin-on filter and oil-to-water cooler

 

Transmission      
Travel Speeds 5.5 mph (8.9 km/h)

 

Capacities      
Fuel Tank 60 gal. (227 L)
Cooling System with Recovery Tank 5.6 gal. (21 L)
Engine Oil with Filter 20 qt. (19 L)
Transmission Reservoir with Filter 17.2 gal (65 L)
Final Drive (each) 14 qt. (13 L)
Hydraulic Reservoir and Filter 13.5 gal. (51 L)

 

Undercarriage 700J LT 700J XLT 700J LGP
Tracks John Deere Dura-Trax, features large deep-heat-treated components; pins and bushings are sealed for life; rollers and idlers are permanetly sealed and lubricated; full length track frame covers reduce material buildup and ease cleaning.
Track Guage 70 in. (1778 mm) 70 in. (1778 mm) 78 in. (1981 mm)
Grouser Width (closed center, single bar) 20 in. (510 mm) 22 in. (560 mm) 30 in. (760 mm)
Shoes (each side) 40 42 42
Track Rollers (each side) 6 7 7
Track Length on Ground 95 in. (2415 mm) 102 in. (2600 mm) 102 in. (2600 mm)
Ground Contact Area 3,818 sq. in
(24 633 cm2)		 4,514 sq. in.
(29 120 cm2)		 6,120 sq. in.
(39 486 cm2)
Ground Pressure 6.8 psi (47 kPa) 5.9 psi (42 kPa) 4.6 psi (32 kPa)
Ground Clearance with Single-Bar Grouser (excluding grouser height) 15 in (381 mm)
Track Pitch 6.91 in. (175.5 mm)

 

Operating Weights 700J LT 700J XLT 700J LGP
With Standard Equipment, Rops, Full Fuel Tank, and 175 lb (79 kg) Operator      
120 in. (3048 mm) Blade and
20 in. (510 mm) Track Shoes		 25,800 lb. (11 703 kg)    
120 in. (3048 mm) Blade and
22 in. (560 mm) Track Shoes		   26,790 lb. (12 152 kg)  
132 in. (3353 mm) Blade and
30 in. (760 mm) Track Shoes		     27,900 lb. (12 653 kg)

 
Machine Dimensions 700J LT 700J XLT 700J LGP
A) Overall Height (Rops or Cab) 118 in. (2985 mm) 118 in. (2985 mm) 118 in. (2985 mm)
B) Overall Length 180 in. (4580 mm) 188 in. (4765 mm) 188 in. (4765 mm)
C) Overall Length with Extended Drawbar 193 in. (4905 mm) 200 in. (5089 mm) 200 in. (5089 mm)
D) Overall Length with Winch 208 in. (5283 mm) 215.3 in. (5467 mm) 215.3 in. (5467 mm)
E) Minimum Ground Clearance 15 in. (381 mm) 15 in. (381 mm) 15 in. (381 mm)
F) Blade Lift Height 36 in. (909 mm) 39 in. (980 mm) 39 in. (980 mm)
G) Blade Digging Depth 20 in. (500 mm) 21 in. (541 mm) 21 in. (541 mm)
H) Blade Cutting Edge Angle, Adjustable 7 degrees 7 degrees 7 degrees
Blade Specs      
I) Width 120 in. (3048 mm) 120 in. (3048 mm) 132 in. (3353 mm)
J) Height
    SAE Capacity		 39 in. (998 mm)
3.44 cu. yd. (2.63 m3)		 39 in. (998 mm)
3.44 cu. yd. (2.63 m3)		 39 in. (998 mm)
3.75 cu. yd. (2.87 m3)
K) Blade Angle 25 degrees 25 degrees 25 degrees
L) Angle Width 109 in. (2769 mm) 109 in. (2769 mm) 121 in. (3073 mm)
M) Tilt 17 in. (424 mm) 17 in. (424 mm) 18 in. (467 mm)
N) Cut Reach 2 in. (51 mm) 1 in. (25 mm) -1 in. (-25 mm)
O) Width Over Track 90 in. (2286 mm) 92 in. (2338 mm) 108 in. (2743 mm)
P) Cast Reach 16 in. (401 mm) 15 in. (375 mm) 13 in. (330 mm)
 
Click Here to download full brochure
 

 

Contact Us    Site Map