|
|
|
|
|
|
|
John
Deere 710J Backhoe Specs
|
| Engine |
| Manufacture and Model |
John Deere
PowerTech 6068T
turbocharged standard |
| Non-Road Emission Standards |
certified to EPA
Tier 2 emissions |
| Displacement |
414 cu. in. (4.5
L) |
| Net Peak Power (ISO9249) |
123 hp (92 kW) @ 2,000 rpm |
| Hydraulics |
| Main Pump |
pressure-compensated load sensing
(PCLS) axial piston |
Pump Flow @ 2,200 rpm
Backhoe
Loader |
52 gpm (197 L/min.)
52 gpm (197 L/min.) |
System Relief Pressure
Backhoe
Loader |
3,625 psi (24 993 kPa)
3,625 psi (24 993 kPa) |
| Electrical |
| Voltage |
12 volt |
| Alternator Rating |
90 amp |
| Tires |
Front |
Rear |
| Mechanical-Front-Wheel Drive |
15-19.5 NHS SS-1 (8) |
21L-28 R-4 (14) |
| Serviceability |
| Hydraulic Oil Filter, Spin-On
Enclosed Replaceable Element, Vertically Mounted |
6-micron
filtration / 1,000 service hours |
| Refill Capacities |
|
| Cooling System |
28
qt. (26 L) |
| Rear Axle |
17
qt. (16 L) |
| Engine Oil (including vertical
spin-on filter) |
21.1
qt. (20 L) |
| Torque Converter and
Transmission |
16
qt. (15 L) |
| Fuel Tank (with
ground-leveling fueling) |
69
gal. (261 L) |
| Hydraulic System |
40
gal. (151 L) |
| Hydraulic Reservoir |
12.4 gal. (47 L) |
Mechanical-Front-Wheel-Drive
Housing
Axle
Planetary (each) |
9.5 qt. (9 L)
0.86 qt. (0.81 L) |
| Operating Weights |
| With Full Fuel Tank, 175-lb.
(79 kg) Operator, and Standard Equipment |
23,000 lb. (10 431 kg) |
Typical with Cab,
Mechanical-Front-Wheel Drive
Extendable Dipperstick, and 1,630-lb.
(740 kg) Counterweight |
26,000 lb. (11 791 kg) |
| Optional
Components |
|
| Cab |
645
lb. (293 kg) |
| Mechanical-Front-Wheel Drive
with Trans |
822
lb. (373 kg) |
| Extendable Dipperstick |
700
lb. (317 kg) |
| Front Loader Coupler |
800
lb. (363 kg) |
| Backhoe Bucket Coupler |
660
lb. (299 kg) |
|
 |
| Overall Dimensions |
| A) Ground Clearance (minimum) |
14 in. (356 mm) |
| B) Overall Length (Transport) |
26 ft.
9 in.
(8.15 m) |
| C) Width over Tires |
7 ft. 6 in.
(2.29 m) |
| D) Height to Top of Rops/Cab |
9 ft.
9 in. (2.97 m) |
E) Length from Axle to Axle
Non-Powered Front Axle
Mechanical-Front-Wheel-Drive Axle |
8 ft. 3 in. (2.52 m)
8 ft. 2 in. (2.49 m) |
| Backhoe Dimensions / Performance |
Digging Force
Bucket Cylinder
Crowd Cylinder |
17,000 lb. (75.6 kN)
11,750 lb. (52.3 kN) |
| |
With Standard
Backhoe |
With Optional Extendable
DIpperstick |
|
Retracted |
Extended |
| F) Loading Height
(truck loading position) |
14 ft. 3 in. (4.34 m) |
14 ft. 3 in. (4.34 m) |
17 ft. (5.18 m) |
| G) Reach from Center of Swing
Pivot |
22 ft. 6 in. (6.86 m) |
22 ft. 6 in. (6.86 m) |
26 ft. 10 in. (8.19 m) |
| H) Reach from Center of Rear
Axle |
26 ft. 8 in. (8.13 m) |
26 ft. 8 in. (8.13 m) |
31 ft. (9.46 m) |
| I) Digging Depth (SAE maximum) |
17 ft. 10 in. (5.44 m) |
17 ft. 10 in. (5.44 m) |
22 ft. 4 in. (6.81 m) |
J) Digging Depth (SAE)
2-ft. (610 mm) Flat Bottom
8-ft. (2440 mm) Flat Bottom |
17 ft. 9 in. (5.41 m)
17 ft. (5.18 m) |
17 ft. 9 in. (5.41 m)
17 ft. (5.18 m) |
22 ft. 5 in. (6.83 m)
21 ft. 7 in. (6.58 m) |
| K) Stabilizer Width (transport
with Rops) |
7 ft. 11. in. (2.41 m) |
7 ft. 11. in. (2.41 m) |
7 ft. 11. in. (2.41 m) |
|
L) Stabilizer Spread (operating) |
13 ft. 1 in. (3.99 m) |
13 ft. 1 in. (3.99 m) |
13 ft. 1 in. (3.99 m) |
| M) Stabilizer Overall Width
(operating) |
15 ft. 3 in. (4.65 m) |
15 ft. 3 in. (4.65 m) |
15 ft. 3 in. (4.65 m) |
| N) Bucket Rotation |
190 deg. |
190 deg. |
190 deg. |
| O) Transport Height |
13 ft. 10 in. (4.17 m) |
13 ft. 10 in. (4.22 m) |
13 ft. 10 in. (4.22 m) |
| Loader Dimensions /
Performance |
| P) Bucket Dump Angle (maximum) |
45
deg. |
| Q) Rollback Angle at Ground
Level |
40
deg. |
| Bucket Capacity |
Heavy-duty 1.87 cu. yd.
(1.43 m3) Bucket |
| Width |
97 in. (2464
mm) |
| Weight |
1,909 lb. (867
kg) |
| Breakout Force |
14,800 lb. (65.8 kN) |
| Lift Capacity (full height) |
8,693 lb. (3947
kg) |
| R) Height to Bucket Hinge Pin
(maximum) |
12 ft.
5 in.
(3.78 m) |
| S) Dump Clearance
(bucket at 45 deg.) |
9 ft.
4 in.
(2.84 m) |
| T) Reach at Full Height
(bucket at 45 deg.) |
30.3 in. (770
mm) |
| U) Digging Depth Below Ground
(bucket level) |
4.1 in. (104
mm) |
V) Length from Front Axle
Centerline to
Bucket Cutting Edge |
7 ft. 3 in.
(2.21 m) |
 |
 |
|
Lift Capacity with Quick-Coupler / Forks |
| A') Maximum Height |
5,803 lb. (2632
kg) |
| B') Maximum Reach |
9,651 lb. (4378
kg) |
| C') At Ground Line |
13,353 lb. (6057
kg) |
| D') Below Ground Line |
5.5 in (140
mm) |
|
|
|
|
Click Here to download full brochure |
|
|