Home Rates Policies Guidelines Exclusions Job Planning Production Estimating Equipment Specs Model Comparisons Conversions Material Weights Download Center Credit Application Damage Waiver Rate Book Equipment Fleet Model Comparisons Erb Home

Engine
Manufacture and Model	John Deere PowerTech 6068H with variable-geometry turbocharger, exhaust gas recirculation, and air-to-air aftercooler; certified to EPA Tier 3 emissions
Rated Power	181 SAE net hp (135 kW) @ 1,800 rpm per ISO 9249
Cylinders (wet sleeve)	6
Displacement	415 cu. in. (6.8 L)
Maximum Net Torque	688 lb ft (933 Nm) @ 1,400 rpm
Lubrication	pressure system with full-flow spin-on filter and oil-to-water cooler
Air Cleaner	dual safety element, dry type with automatic dust ejector
Electrical System	24 volt with 80-amp alternator

 

Transmission
Forward and Reverse Speed Ranges       Low Speed Range       High Speed Range	0 to 4 mph (0 to 6.4 km/h) 0 to 6.2 mph (0 to 10 km/h)

 

Capacities
Fuel Tank with Lockable Cap	95.1 gal. (360 L)
Cooling System with Recovery Tank	5.4 gal. (20.5 L)
Engine Oil Including Filter	7.3 gal. (27.5 L)
Hydraulic/Hydrostatic Reservoir with Filter	22 gal. (83 L)
Splitter Drive	3.3 qt. (3.1 L)
Final Drive (each)	4.5 gal. (17 L)
Pivot Shaft (fill - no drain) (each side)	5.3 qt. (5 L)
Dual-Cone Seal (each side)	3.5 qt. (3.3 L)

 

Undercarriage
Tracks	John Deere Dura-Trax features large deep-heat-treated components; pins and bushings are sealed for life; rollers and idlers are permanently sealed and lubricated
Sprocket     Segments (each side)	segmented 5
Track Gauge (standard)	5 ft. 11 in (1803 mm)
Chain	sealed and lubricated
Track Shoes (each side)	38
Ground Contact Area     20 in (508 mm) Grouser Width (closed center, double bar)      22 in (560 mm) Grouser Width (closed center, double bar)	4,050 sq. in. (26 129 cm2) 4,4454 sq. in. (28 735 cm2)
Ground Clearance, Minimum with Double Bar Grouser (excluding grouser height)	18 in. (457.2 mm)
Length of Track on Ground	101 in. (2565 mm)
Track Gauge (standard)	66 in. (1680 mm)
Track Rollers (each side)	6
Carrier Rollers	1
Track Pitch	8 in. (203 mm)

 

Ground Pressure
With Standard Equipment, Cab, Bucket, Full Fuel Tank, and 175 lb (79 kg) Operator
20 in (508 mm) Double Grouser Shoes	11.3 psi (78 kPa)
22 in (560 mm) Double Grouser Shoes	10.3 psi (71 kPa)

 

SAE Operating Weight
With Standard Equipment, Canopy, Bucket, Full Fuel Tank, and 175 lb (79 kg) Operator, 20 in (508 mm) Double Grouser Shoes, and 2,090 lb (948 kg) Integral Counterweight	46,255 lb (20 981 kg)

Overall Dimensions
A) Height over Cab (including grousers)	10 ft 10 in (3.31 m)
B) Height over Exhaust Pipe	9 ft 8 in (2.95 m)
C) Length to Front of Track	16 ft 0 in (4.87 m)
D) Overall Length (with bucket)	22 ft 6 in (6.85 m)
E) Track Guage	5 ft 11 in (1.80 m)
F) Ground Clearance	18 in (458 mm)
Standard Bucket with Bolt-on Teeth
Capacity Heaped	3.14 cu. yd. (2.4 m3)
Breakout Force	36,869 lb (164 kN)
Static Tipping Load	31,597 lb. (14 332 kg)
Bucket Weight	3,757 lb (1704 kg)
G) Dumping Height at 45 degrees	9 ft 9 in (2.98 m)
H) Reach at 45 degrees	4 ft 0 in (1.21 m)
I) Maximum Digging Depth Below Grade	6 in (150 mm)
J) Maximum Operating Height	18 ft 1 in (5.50 m)
K) Maximum Height of Hinge Pin	13 ft 4 in (4.05 m)
L) Height of Hinge Pin, Transport Position	23 in (576 mm)
M) Width of Bucket	8 ft 4 in (2.53 m)