John Deere 75D Excavator Specs
 

Engine
Type Isuzu 4LE2X
Non Road Emission Standard certified to EPA interim Tier 4 emissions
Displacement 133 cu. in. (2.2 L)
Net Power (ISO 9249) 54 hp (40.5.0 kW) @ 2,000 rpm
Aspiration turbocharged with intercooler

 

Powertrain
Maximum Travel Speed
     Low
     High
1.9 mph (3.1 km/h)
3.1 mph (5.0 km/h)

 

Electrical

    
Batteries 2 x 12 volt
Reserve Capacity 100 min.
Alternator Rating 50 amp

 

Undercarriage

    
Drawbar Pull 14,661 lb (6650 kg)

 

Ground Pressure

    
24 in. (600 mm) Triple Semi-Grouser Shoes
18 in. (450 mm) Rubber Crawler Pads
18 in. (450 mm) Rubber Crawler Belt		 3.7 psi (26 kPa)
4.9 psi (34 kPa)
4.9 psi (34 kPa)

 

Serviceability

    
Fuel Tank 35.7 gal (135 L)
Cooling System 2.7 gal (10.3 L)
Engine Oil with Filter 3.2 gal (12.1 L)
Hydraulic Tank 15 gal (56 L)
Hydraulic System 26 gal (100 L)
Propel Gearbox (each) 1.3 qt. (1.2 L)

 

Operating Weights

    
Full Fuel Tank, 175 lb Operator; 0.53 cu yd, 30 in. 735 lb Bucket; 5 ft. 4 in. Arm; 3,049 Counterweight; and 8 ft. 1 in. Blade  
24 in. (600 mm) Triple Semi-Grouser Shoes
18 in. (450 mm) Rubber Crawler Pads
18 in. (450 mm) Rubber Crawler Belt		 17,743 lb (8048 kg)
17,461 lb (7920 kg)
17,412 lb (7898 kg)
 

Operating Dimensions

  
Arm Length 5 ft. 4 in. (1.62 m) 6 ft. 11 in. (2.12 m)
Arm Force 8,554 lb (38.1 kN) 7,209 lb (32.1 kN)
Bucket Digging Force 12,368 lb (55.0 kN) 12,368 lb (55.0 kN)
Lifting Capacity Over Front at Ground Level
20 ft. (6.1 m) Reach		 4,248 lb (1927 kg) 4,151 lb (1883 kg)
A) Maximum Reach 21 ft. 1 in. (6.43 m) 22 ft. 8 in. (6.92 m)
A')Maximum Reach at Ground Level 20 ft. 6 in. (6.26 m) 22 ft. 2 in. (6.76 m)
B) Maximum Digging Depth 13 ft. 6 in. (4.11 m) 15 ft. 1 in. (4.61 m)
B')Maximum Digging Depth at 8 ft.
Flat Bottom		 12 ft. 4 in. (3.76 m) 14 ft. 2 in. (4.33 m)
C) Maximum Cutting Height 23 ft. 8 in. (7.21 m) 25 ft. 0 in. (7.61 m)
D) Maximum Dumping Height 16 ft. 10 in. (5.12 m) 18 ft. 1 in. (5.51 m)
E) Minimum Swing Radius 5 ft. 11 in. (1.80 m) 7 ft. 1 in. (2.16 m)
F) Maximum Vertical Wall 12 ft. 0 in. (3.67 m) 13 ft. 10 in. (4.22 m)
G) Tail Swing Radius 4 ft. 3 in. (1.29 m) 4 ft. 3 in. (1.29 m)
 

 

Machine Dimensions

 5 ft. 4 in. (1.62 m) Arm 6 ft. 11 in. (2.12 m) Arm
A) Overall Length 20 ft. 8 in. (6.30 m) 20 ft. 11 in. (6.37 m)
B) Overall Height 8 ft. 6 in. (2.60 m) 9 ft. 3 in. (2.83 m)
C) Overall Width
    24 in. (600 mm) Triple Semi Grouser
         Shoes
         Track Height
    18 in. (450 mm) Rubber Crawler Pads
    18 in. (450 mm) Rubber Crawler Belt		 8 ft. 1 in. (2.47 m)
26 in. (0.65 m)
7 ft. 9 in. (2.37 m)
7 ft. 9 in. (2.37 m)
D) Rear End Length / Swing Radius 4 ft. 3 in. (1.29 m)
E) Distance Between Idler/Sprocket Centerline 7 ft. 6 in. (2.29 m)
F) Undercarriage Length 9 ft. 7 in. (2.92 m)
G) Counterweight Clearance 30 in. (0.76 m)
H) Cab Height 8 ft. 10 in. (2.69 m)
I) Ground Clearance 14 in. (360 mm)
J) Upperstructure Width 7 ft. 5 in. (2.25 m)
K) Gauge Width 6 ft. 2 in. (1.87 m)
L) Blade Lift Height 15 in. (380 mm)
M) Blade Cut Below Grade 11 in. (280 mm)
N) Blade Lift Angle
     Blade Height
     Blade Width		 27 deg
18 in. (460 mm)
8 ft. 1 in. (2.47 m)

 

Lift Capacities

Boldface italic type indicates hydraulic-limited capacities; lightface type indicates stability-limited capacities, in lb. (kg). Ratings at bucket lift hook; machine equipped with 12 ft. 8 in. (3.72 m) boom, 0.37 cu. yd. bucket; and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine.  All lift capacities are based on SAE J1097.
Load Point Height 10 ft. (3.05 m) 15 ft. (4.57 m) 20 ft. (6.10 m)
Over Front Over Side Over Front Over Side Over Front Over Side

With 5 ft. 4 in. (1.62 m) arm, either 18 in. (450 mm) rubber crawler pads or 18 in. (450 mm) rubber crawler belt, and 8 ft. 1 in. (2470 mm) on ground
15 ft. (4.57 m)     3,650 (1656) 3,432 (1557)    
10 ft. (3.05 m)     4,242 (1924) 3,307 (1500) 3,560 (1615) 1,996 (905)
5 ft. (1.52 m)     5,630 (2554) 3,035 (1377) 4,036 (1831) 1,919 (870)
Ground Line     6,352 (2881) 2,852 (1294) 4,249 (1927) 1,841 (835)
-5 ft. (-1.52 m) 6,370 (2889) 5,413 (2455) 5,808 (2634) 2,825 (1281)    
-10 ft. (-3.05 m)            

With 6 ft. 11 in. (2.12 m) arm, either 18 in. (450 mm) rubber crawler pads or 18 in. (450 mm) rubber crawler belt, and 8 ft. 1 in. (2470 mm) on ground
10 ft. (3.05 m)     3,599 (1632) 3,362 (1525) 3,290 (1492) 2,013 (913)
5 ft. (1.52 m)     5,095 (2311) 3,074 (1394) 3,752 (1702) 1,912 (867)
Ground Line     6,182 (2804) 2,837 (1287) 4,152 (1883) 1,810 (821)
-5 ft. (-1.52 m) 8,748 (3968) 5,278 (2394) 6,074 (2755) 2,762 (1253) 3,959 (1796) 1,771 (803)
-10 ft. (-3.05 m) 6,831 (3098) 5,424 (2460) 4,431 (2010) 2,827 (1282)    

With 5 ft. 4 in. (1.62 m) arm, 24 in. (600 mm) triple semi-grouser shoes,  and 8 ft. 1 in. (2470 mm) on ground
15 ft. (4.57 m)     3,650 (1656) 3,432 (1557)    
10 ft. (3.05 m)     4,242 (1924) 3,307 (1500) 3,560 (1615) 1,996 (905)
5 ft. (1.52 m)     5,630 (2554) 3,035 (1377) 4,036 (1831) 1,919 (870)
Ground Line     6,352 (2881) 2,852 (1294) 4,249 (1927) 1,841 (835)
-5 ft. (-1.52 m) 6,370 (2889) 5,559 (2522) 5,808 (2634) 2,825 (1281)    
-10 ft. (-3.05 m)            

With 6 ft. 11 in. (2.12 m) arm, 24 in. (600 mm) triple semi-grouser shoes, and 8 ft. 1 in. (2470 mm) on ground
10 ft. (3.05 m)     3,599 (1632) 3,445 (1563) 3,290 (1492) 2,072 (940)
5 ft. (1.52 m)     5,095 (2311) 3,158 (1432) 3,752 (1702) 1,971 (894)
Ground Line     6,182 (2804) 2,920 (1324) 4,152 (1883) 1,868 (847)
-5 ft. (-1.52 m) 8,748 (3968) 5,424 (2460) 6,074 (2755) 2,845 (1290) 3,959 (1796) 1,829 (830)
-10 ft. (-3.05 m) 6,831 (3098) 5,570 (2527) 4,431 (2010) 2,911 (1320)    
 
Click Here to download full brochure
 

 

Contact Us    Site Map