| Engine |
|
Type |
John Deere PowerTech 6135H
complies with EPA Tier 3 regulations |
|
Cylinders |
6 |
|
Valves per Cylinder |
4 |
|
Displacement |
824 cu. in. (13.5 L) |
|
Net Peak Power (ISO9249) |
380 hp (283 kW) @ 1,600 rpm |
|
Net Peak Torque (ISO9249) |
1,323 lb. ft. (1793 Nm) @ 900
rpm |
|
Aspiration |
turbocharged and charge air cooled |
|
Air Cleaner |
dual element dry type; restriction
indicator in cab |
|
Fan Drive |
hydraulically driven,
proportionally controlled, fan aft of coolers |
|
Electrical System |
24 volt with 80-amp alternator |
|
Batteries (two 12 volt) |
1,400 CCA; reserve capacity: 200
min. |
| Transmission |
Travel Speeds
Gear 1
Gear 2
Gear 3
Gear 4 |
Forward
4.1 mph (6.6 km/h)
7.6 mph (12.2 km/h)
11.7 mph (18.8 km/h)
25.2 mph (40.5 km/h) |
Reverse
4.1 mph (6.6 km/h)
7.6 mph (12.2 km/h)
17.0 mph (27.4 km/h)
|
| Refill
Capacities |
|
Fuel Tank (with ground level
fueling) |
146 gal. (553 L) |
|
Cooling System |
55 qt. (52 L) |
|
Engine Oil, Including Filter |
40 qt. (38 L) |
|
Transmission, Including Filter |
48 qt. (45.4 L) |
|
Axles |
58 qt. (55 L) front / 62 qt. (59
L) rear |
|
Hydraulic Reservoir and Filters |
64.5 gal. (244 L) |
|
Parking Brake |
24 oz. (0.7 L) |
|
| Dimensions
(with
Pin On Bucket) |
|
A) Height to Top of Cab |
12 ft. 4 in. (3748 mm) |
|
B) Height to Top of Exhaust |
11 ft. 8 in. (3549 mm) |
|
C) Ground Clearance |
18.2 in. (460 mm) |
|
D) Length from Centerline to Front
Axle |
73 in. (1850 mm) |
|
E) Wheelbase |
146 in. (3700 mm) |
|
F) Dump Clearance |
see below |
|
G) Height to Hinge Pin, Fully
Raised |
15 ft. 2 in. (4602 mm) |
|
H) Dump Reach |
see below |
|
I) Maximum Digging Depth |
3.7 in. (93 mm) |
|
J) Overall Length |
see below |
|
K) Maximum Rollback at Ground
Level |
41 degrees |
|
Standard Z-Bar
Information with Pin On Bucket |
|
Bucket Type/Size |
General Purpose w/ Bolt on Edge |
|
Capacity, Heaped SAE |
7.25 cu. yd. (5.6 m3) |
|
Capacity, Struck SAE |
6.2 cu. yd. (4.7 m3) |
|
Bucket Weight |
8,288 lb. (3759 kg) |
|
Bucket Width |
11 ft. 4 in. (3460 mm) |
|
Breakout Force, SAE J732C |
47,860 lb (21 709 kg) |
|
Tipping Load, Straight |
51,488 lb (23 355 kg) |
|
Tipping Load, 37-Degree Turn, SAE |
45,160 lb (20 484 kg) |
|
Tipping Load, 40-Degree Full Turn,
SAE |
44,136 lb (20 020 kg) |
|
Reach, 45-Degree Dump, 7 ft (2.13
m) Clearance |
7 ft. 6 in. (2280 mm) |
|
Reach, 45-Degree Discharge, Full
Height |
4 ft 11 in. (1490 mm) |
|
Dump Clearance, 45-Degree
Discharge, Full Height |
10 ft. 11 in. (3320 mm) |
|
Overall Length, Bucket on Ground |
31 ft. 8 in. (9650 mm) |
|
Loader Clearance Circle, Bucket in
Carry Position |
49 ft. 5 in. (15 060 mm) |
|
Operating Weight |
70,629 lb (32 037 kg) |
|
