| Engine |
|
Manufacture and Model |
John Deere PowerTech 6090H
certified to EPA Tier 3 emissions |
|
Rated Speed |
2,100 rpm |
Engine Power
Gear 1
Gear 2
Gear 3
Gear 4
Gear 5
Gear 6
Gear 7
Gear 8 |
180 net hp (134 kW)
182 net hp (136 kW)
204 net hp (152 kW)
219 net hp (163 kW)
227 net hp (169 kW)
240 net hp (179 kW)
250 net hp (186 kW)
255 net hp (190 kW) |
|
Aspiration |
turbocharged, charge air cooled |
|
Number of Cylinders |
6 |
|
Displacement |
548 cu. in. (9.0 L) |
|
Net Torque @ 1,000 rpm |
949 lb. ft. (1287 Nm) @ 60% net torque rise |
|
Lubrication |
full-flow spin-on filter and integral cooler |
|
Air Cleaner with Restriction
Indicator |
dual element, dry |
|
Electrical System |
24 volt with 100-amp alternator |
|
Batteries |
1,400 cold-cranking amps, 440-min.
reserve capacity |
| Operating
Weights |
|
SAE Operating Weights with
Standard Equipment |
Front
Rear
Total |
10,010 lb. (4540 kg)
26,110 lb (11 843 kg)
36,120 lb. (16 384 kg) |
|
Typical Operating Weights with
Front Push Block and Ripper |
Front
Rear
Total |
12,940 lb. (5869 kg)
30,179 lb. (13 689 kg)
43,119 lb. (19 558 kg) |
|
Maximum Operating Weight (total) |
48,620 lb. (22 054 kg) |
| Transmission |
|
Type |
direct-drive John Deere Powershift
Plus
modulated shift on-the-go, Event Based Shifiting (EBS) |
Travel Speeds
Shift Lever Position 1
Shift Lever Position 2
Shift Lever Position 3
Shift Lever Position 4
Shift Lever Position 5
Shift Lever Position 6
Shift Lever Position 7
Shift Lever Position 8 |
Forward and Reverse @
2,180 rpm with 14.00-24 tires
2.5 mph (4.0 km/h)
3.5 mph (5.6 km/h)
4.8 mph (7.7 km/h)
6.8 mph (10.9 km/h)
10.2 mph (16.5 km/h)
14.4 mph (23.1 km/h)
19.8 mph (31.9 km/h)
27.7 mph (44.5 km/h) |
| Blade Function |
|
|
All-hydraulic,
industry standard lever placement of blade
function controls;
includes float position; 7 discrete saddle positions |
Blade Range
Lift Above Ground
Blade Side Shift, Right or Left
Shoulder Reach Outside Wheels
Pitch at Ground Level |
17.8 in. (452 mm)
26.9 in. (683 mm)
7 ft. 8 in. (2329 mm)
42 degrees forward / 5 degrees back |
| Moldboard |
|
Type |
high-strength, pre-stressed, wear-resistant,
high carbon steel, equipped with replaceable side-shift
wear inserts |
|
Length |
14 ft. (4.27 m) |
|
Height |
27 in. (686 mm) |
|
Thickness |
1.0 in. (25 mm) |
| Capacities |
|
Fuel Tank |
110 gal. (416.4 L) |
|
Cooling System |
13 gal. (49.2 L) |
|
Engine Lubrication, Including
Filter |
7.1 gal. (26.9 L) |
|
Transmission |
6 gal. (22.7 L) |
|
Differential Housing |
9.5 gal. (36 L) |
|
Tandem Housing (each) |
20 gal. (75.7 L) |
|
Circle Gearbox |
1.5 gal. (5.7 L) |
|
Hydraulic Reservoir |
14 gal. (53 L) |
|
