| Engine |
|
Manufacture and Model |
John Deere PowerTech 6090H
certified to EPA Tier 3 emissions |
|
Rated Speed |
2,100 rpm |
Engine Power
Gear 1 (6WD on)
Gear 2 (6WD on)
Gear 3 (6WD on)
Gear 4 (6WD on)
Gear 5 (6WD on)
Gear 6 (6WD on)
Gear 7 (6WD on)
Gear 8 |
214 net hp (160 kW)
219 net hp (163 kW)
241 net hp (180 kW)
241 net hp (180 kW)
250 net hp (186 kW)
265 net hp (198 kW)
275 net hp (205 kW)
265 net hp (198 kW) |
|
Aspiration |
turbocharged, charge air cooled |
|
Number of Cylinders |
6 |
|
Displacement |
548 cu. in. (9.0 L) |
|
Net Torque @ 1,000 rpm |
998 lb. ft. (1353 Nm) @ 53% net torque rise |
|
Lubrication |
full-flow spin-on filter and
integral cooler |
|
Air Cleaner with Restriction
Indicator |
dual element, dry |
|
Electrical System |
24 volt with 100-amp alternator |
|
Batteries |
1,400 cold-cranking amps, 440-min.
reserve capacity |
| Operating
Weights |
|
SAE Operating Weights with
Standard Equipment |
Front
Rear
Total |
11,250 lb. (5103 kg)
26,990 lb (12 242 kg)
38,240 lb. (17 345 kg) |
|
Typical Operating Weights with
Front Push Block and Ripper |
Front
Rear
Total |
14,124 lb. (6407 kg)
30,944 lb. (14 036 kg)
45,068 lb. (20 443 kg) |
|
Maximum Operating Weight (total) |
48,620 lb. (22 054 kg) |
| Transmission |
|
Type |
direct-drive John Deere Powershift
Plus
modulated shift on-the-go, Event Based Shifiting (EBS) |
Travel Speeds
Shift Lever Position 1
Shift Lever Position 2
Shift Lever Position 3
Shift Lever Position 4
Shift Lever Position 5
Shift Lever Position 6
Shift Lever Position 7
Shift Lever Position 8 |
Forward and Reverse @
2,180 rpm with 14.00-24 tires
2.5 mph (4.0 km/h)
3.5 mph (5.6 km/h)
4.8 mph (7.7 km/h)
6.8 mph (10.9 km/h)
10.2 mph (16.5 km/h)
14.4 mph (23.1 km/h)
19.8 mph (31.9 km/h)
27.7 mph (44.5 km/h) |
| Blade Function |
|
|
All-hydraulic,
industry standard lever placement of blade
function controls;
includes float position; 7 discrete saddle positions |
Blade Range
Lift Above Ground
Blade Side Shift, Right or Left
Shoulder Reach Outside Wheels
Pitch at Ground Level |
17.8 in. (452 mm)
26.9 in. (680 mm)
7 ft. 8 in. (2329 mm)
42 degrees forward / 5 degrees back |
| Moldboard |
|
Type |
high-strength, pre-stressed, wear-resistant,
high carbon steel, equipped with replaceable side-shift
wear inserts |
|
Length |
14 ft. (4.27 m) |
|
Height |
27 in. (686 mm) |
|
Thickness |
1.0 in. (25 mm) |
| Capacities |
|
Fuel Tank |
110 gal. (416.4 L) |
|
Cooling System |
13 gal. (49.2 L) |
|
Engine Lubrication, Including
Filter |
7.1 gal. (26.9 L) |
|
Transmission |
6 gal. (22.7 L) |
|
Differential Housing |
9.5 gal. (36 L) |
|
Tandem Housing (each) |
20 gal. (75.7 L) |
|
Circle Gearbox |
1.5 gal. (5.7 L) |
|
Hydraulic Reservoir |
14 gal. (53 L) |
|
